Upgrade ROMMON on C6500 SUP2

This publication describes how to determine if you need to upgrade the ROMMON on your Catalyst 6000 family or Cisco 7600 series Internet Router Supervisor Engine 2 (WS-X6K-S2-MSFC2, WS-X6K-S2U-MSFC2) and also provides the procedure to download the new ROMMON image from Cisco.com and then upgrade the ROMMON on your Supervisor Engine 2.

With this procedure, you can upgrade the ROMMON image similar to the way that you upgrade the operating system software (supervisor engine software or MSFC Cisco IOS software). Without this procedure, you have to order the upgrade kit and physically replace the ROMMON (boot ROM).

Login required URL:

• http://www.cisco.com/en/US/customer/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_13488.html#wp146316

Login not required:

•  Release Notes for Catalyst 6000 Family Supervisor Engine 2 ROMMON Software

c6509#sho mod
Mod Ports Card Type Model Serial No.
— —– ————————————– —————— ———–
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE
3 8 8 port 1000mb GBIC Enhanced QoS WS-X6408A-GBIC
4 48 48 port 10/100 mb RJ-45 ethernet WS-X6248-RJ-45

Mod MAC addresses Hw Fw Sw Status
— ———————————- —— ———— ———— ——-
1 0001.6475.e578 to 0001.6475.e579 2.2 6.1(3) 12.1(26)E8 Ok
3 0005.3134.ddac to 0005.3134.ddb3 2.0 5.4(2) 8.5(0.9)TFW3 Ok
4 00d0.c0cd.f968 to 00d0.c0cd.f997 1.2 5.1(1)CSX 8.5(0.9)TFW3 Ok

Mod Sub-Module Model Serial Hw Status
— ————————— ————— ————— ——- ——-
1 Policy Feature Card 2 WS-F6K-PFC2 SAD099999F 1.3 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAD0999YZP 1.2 Ok

c6509#upgrade rom-monitor slot 1 sp file tftp://192.168.1.1/cat6000-sup2-rm2.7-1-1.srec
Copying tftp://192.168.1.1/cat6000-sup2-rm2.7-1-1.srec onto SP’s bootflash…
Loading cat6000-sup2-rm2.7-1-1.srec from 192.168.1.1 (via Vlan998): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK – 412891 bytes]

Loading cat6000-sup2-rm2.7-1-1.srec from 192.168.1.1 (via Vlan998): !
c6509#
c6509#show rom-monitor slot 1 sp

Region F1: FIRST_RUN, preferred Region
F2: INVALID

Currently running ROMMON from S (Gold) region

After power cycle…

c6509>sho mod
Mod Ports Card Type Model Serial No.
— —– ————————————– —————— ———–
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE
3 8 8 port 1000mb GBIC Enhanced QoS WS-X6408A-GBIC
4 48 48 port 10/100 mb RJ-45 ethernet WS-X6248-RJ-45

Mod MAC addresses Hw Fw Sw Status
— ———————————- —— ———— ———— ——-
1 0001.6475.e578 to 0001.6475.e579 2.2 7.1(1) 12.2(18)SXF1 Ok
3 0005.3134.ddac to 0005.3134.ddb3 2.0 5.4(2) 8.5(0.46)RFW Ok
4 00d0.c0cd.f968 to 00d0.c0cd.f997 1.2 5.1(1)CSX 8.5(0.46)RFW Ok

Mod Sub-Module Model Serial Hw Status
—- ————————— —————— ———– ——- ——-
1 Policy Feature Card 2 WS-F6K-PFC2 SAD0999999F 1.3 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAD0999YZP 1.2 Ok

Mod Online Diag Status
—- ——————-
1 Pass
3 Pass
4 Pass